iPhone 7 Plus repair prices

The iPhone 7 Plus's strengthened case design better protects the touch panel, but sometimes it happens that the picture goes away or the glass breaks. The inside structure is similar to the previous generations, except the placement of the connectors. For this reason, we have to replace the entire touch and display module.

Strong mechanical forces can damage the backplate of the iPhone, which undermines it's water resistance. In these cases, replacing the back case becomes necessary.

If the device discharges abnormally fast or doesn't work without plugging it in into the charger, it's necessary to replace the battery.

If the device doesn't charge properly or only charges in a certain position, it's necessary to replace the dock ribbon cable.

If the power button doesn't work at all, or only rarely, it's ribbon cable has to be replaced.

If the volume buttons on the side of the phone get damaged, they could fail to function or could create false inputs. In these cases, the ribbon cable has to be replaced.

If the audio quality during a call is bad and distorted, this is caused by the earpiece speaker, which needs to be replaced.

If sound and ringtone quality is distorted, this is caused by the speaker, which has to be replaced to solve the issue.

If the sound from the earpiece speaker is intermittent or the display doesn't turn off when we hold it near our face, then the sensor cable has to be replaced.

Significant mechanical forces can damage the back camera and sometimes even disable it. In this case, only replacing the camera module helps solve the problem.

If the touch display gets damaged, the front camera can go unoperational as well. In this case, the front camera, which is located on the sensor cable, has to be replaced.

The taptic engine has an even more significant role in the iPhone 7, because it creates the pressure feedback for the home button as well. If that disappears, the taptic engine has to be replaced.

If some iOS functions don't work properly, the system slows down, discharges faster, doesn't connect to the internet - all these can be caused by software problems. Updating to the latest iOS can usually solve these (for technical reasons, going back to previous iPad software versions is not possible).

Before updating to the latest iOS version, we backup your data and then we restore it to the updated device. This is only possible if your device is still functional or turns on after repairs. If the user requires it, we can save some data types to external storage.

Ultrasonic cleaning is required after liquid damage to avoid the corrosion of the logic board and therefore irreversible damage. We clean out the connectors and we resolder them, if necessary. Usually the battery also has to be replaced after liquid damage.

The charge regulator chip is faulty if the device discharges too fast and the battery runs out of charge in a few hours, or if the iPhone doesn't charge while plugged in and won't turn on after running out of charge. This can be caused by bad quality charge adapters or cables.

The backlight controller usually develops a fault because of overloading after liquid damage. Damage to the logic board during inexperienced repair could cause issues as well.

If the iPhone doesn't see any Wi-Fi network, or the Wi-Fi signal is extremely weak or if it refuses to connect to any network, or if the Wi-Fi and/or Bluetooth options go grey in the Settings app, the Wi-Fi chip on the logic board could be faulty.

The logic board connectors are very sensitive, so badly trained repair personnel, liquid damage or dropping damage can impair them. Repairing them requires serious preparedness and experience, so it's important to take our device to the appropriate repair center.

If the sound coming out of the speakers is broken up, distorted or if it the volume is too low - and software issues have been ruled out, the audio chip could be faulty. Like all logic board repairs, replacing the audio chip has to be done extremely carefully.

The proper functioning of the whole iPhone depends on the power regulator chip, which controls the power and charging systems, the display backlight and giving power to the CPU and GPU. Because of the variety of issues that could be caused by the failure of the power regulator chip - for example the iPad can't be turned on, it gets abnormally warm or the touch screen doesn't work - it has to be properly diagnosed before repair.

If the battery in the iPhone wasn't replaced in a proper repair center, the gluing of the battery is often not done correctly and the battery is not fixed inside the device. This could cause the iPhone to randomly power off. We fix the battery in place with the original manufacturing glue.

The interior antenna cable usually gets torn during untrained and inexperienced repairs. We replace the broken antenna with a new one.

A typical issue with the front panel is that it can move from its position and the plastic frame can separate from the glass panel. This is usually caused by extreme heat or the deformation of the iPhone. In this case, don't try to put the display back in its place at home, because that can damage the LCD or its ribbon cable.

We replace screws in the iPhone that were lost for some reason.

We replace the lost or damaged SIM slot with a brand new one, which has the same colour as the case of the iPhone.