iPhone 6s repair prices

Strong mechanical forces can damage the backplate of the iPhone. In this case, replacing the back case becomes necessary.

If the device discharges abnormally fast or doesn't work without plugging it in into the charger, it's necessary to replace the battery.

If the device fails to charge properly or only charges in a certain position, it's necessary to replace the dock ribbon cable.

If the power button doesn't work at all, or only rarely, or if the LED flashes don't turn on, or if during video recording the upper microphone doesn't work, the power button ribbon cable has likely failed.

If the home button can't sense our finger and the home function doesn't work, the ribbon cable has to be replaced. If possible, we only repair the electronics behind the home button, so that the Touch ID will continue to work.

If the home button can't sense our finger and the home function doesn't work, the button and it's ribbon cable have to be replaced. For technical reasons, replacing the home button leads to the loss of the Touch ID functionality.

If the audio quality during a call is bad and distorted, this is caused by the earpiece speaker, which needs to be replaced. Dust filling up the speaker grills can also lead to issues, in which case only that small part has to be replaced for HUF 4.000.

Significant mechanical forces can damage the back camera and sometimes even disable it. In this case, only replacing the camera module helps solve the problem. If the picture is smudgy, that could be caused by dust, in which case we clean the device for only HUF 4000.

The lens cover safire glass is susceptible to breaking because of dropping damage, due to it's protruding design. If the camera module works properly and only the lens cover is damaged, it can be replaced separately.

If the sound from the earpiece speaker is intermittent or the display doesn't turn off when we hold it near our face, then the sensor cable has to be replaced.

If the touch display gets damaged, the front camera can go unoperational as well. In this case, the front camera, which is located on the sensor cable, has to be replaced.

If sound and ringtone quality is distorted, this is caused by the speaker, which has to be replaced to solve the issue. If it doesn't work at all, that points to problems witht he dock connector. Dust in the speaker grills can also lead to lower volumes, in which case only that small part has to be replaced for HUF 4.000.

If the phone doesn't vibrate, or the vibration has gotten significantly weaker or it vibrates in a strange way even when the software is properly configured, the vibration engine has to be replaced.

If the volume buttons on the side of the phone get damaged, they could fail to function or could create false inputs. In these cases, the ribbon cable has to be replaced.

If some iOS functions don't work properly, the system slows down, discharges faster, doesn't connect to the internet - all these can be caused by software problems. Updating to the latest iOS can usually solve these (for technical reasons, going back to previous iPad software versions is not possible).

Before updating to the latest iOS version, we backup your data and then we restore it to the updated device. This is only possible if your device is still functional or turns on after repairs. If the user requires it, we can save some data types to external storage.

Ultrasonic cleaning is required after liquid damage to avoid the corrosion of the logic board and therefore irreversible damage. We clean out the connectors and we resolder them, if necessary. Usually the battery also has to be replaced after liquid damage.

The charge regulator chip is faulty if the device discharges too fast and the battery runs out of charge in a few hours, or if the iPhone doesn't charge while plugged in and won't turn on after running out of charge. This can be caused by bad quality charge adapters or cables.

The backlight controller usually develops a fault because of overloading after liquid damage. Damage to the logic board during inexperienced repair could cause issues as well.

If the iPhone doesn't see any Wi-Fi network, or the Wi-Fi signal is extremely weak or if it refuses to connect to any network, or if the Wi-Fi and/or Bluetooth options go grey in the Settings app, the Wi-Fi chip on the logic board could be faulty.

The logic board connectors are very sensitive, so badly trained repair personnel, liquid damage or dropping damage can impair them. Repairing them requires serious preparedness and experience, so it's important to take our device to the appropriate repair center.

A badly inserted SIM card or a bad quality SIM adapter can cause problems, which result in the iPhone not or not always recognising the SIM card. In these cases the SIM controller on the logic board has to be repaired.

If the sound coming out of the speakers is broken up, distorted or if it the volume is too low - and software issues have been ruled out, the audio chip could be faulty. Like all logic board repairs, replacing the audio chip has to be done extremely carefully.

The proper functioning of the whole iPhone depends on the power regulator chip, which controls the power and charging systems, the display backlight and giving power to the CPU and GPU. Because of the variety of issues that could be caused by the failure of the power regulator chip - for example the iPad can't be turned on, it gets abnormally warm or the touch screen doesn't work - it has to be properly diagnosed before repair.

If the battery in the iPhone wasn't replaced in a proper repair center, the gluing of the battery is often not done correctly and the battery is not fixed inside the device. This could cause the iPhone to randomly power off. We fix the battery in place with the original manufacturing glue.

The interior antenna cable usually gets torn during untrained and inexperienced repairs. We replace the broken antenna with a new one.

A typical issue with the front panel is that it can move from its position and the plastic frame can separate from the glass panel. This is usually caused by extreme heat or the deformation of the iPhone. In this case, don't try to put the display back in its place at home, because that can damage the LCD or its ribbon cable.

We replace screws in the iPhone that were lost for some reason.

We replace the lost or damaged SIM slot with a brand new one, which has the same colour as the case of the iPhone.